What Size Should a Cross Stitch Pattern Be?
Two numbers decide the size of a finished piece, and they do different jobs. Width in stitches decides how much detail the design can hold. Fabric count decides how big those stitches end up. Mixing the two up is why a chart sometimes arrives far larger or far smaller than expected.
The short answer
Pick the width in stitches for the detail you need: about 60 for a simple motif, 100–120 for a design with a face or fine outlines, 150 and up for a portrait. Then pick the fabric count for the finished size: stitches ÷ count = inches. The pattern maker shows the finished size in inches and centimetres as you change either one.

Width in stitches is the real setting
A chart cannot hold detail smaller than one square. At 60 stitches wide, an eye is two or three squares and reads as a dot. At 110, the same eye has room for a highlight. That is why the narrow version above looks chunky: nothing was lost in quality, there was simply nowhere to put the detail.
Stitch count also decides the work. Our two examples are about 1,800 and about 6,000 stitches — roughly three times the evenings.
Fabric count changes size, not detail
| Fabric | Stitches per inch | Finished width |
|---|---|---|
| 14 count Aida | 14 | 7.9 in / 20.0 cm |
| 16 count Aida | 16 | 6.9 in / 17.5 cm |
| 18 count Aida | 18 | 6.1 in / 15.5 cm |
The chart is identical in all three rows. Higher count squeezes the same design into less fabric, which is lovely in a small hoop and harder on the eyes. If you are framing to a set size, work backwards: inches × count = stitches.
Leave the background out
Partial coverage — leaving white areas as bare fabric — cuts the stitch count sharply and makes the subject stand out. On the dragon above, the background is unstitched, which is why 110 stitches wide is still a manageable project.
Patterns with the size worked out for you
Instant PDF download from $3.77. Printable and mobile charts, Pattern Keeper file and full DMC list.
Before you cut fabric
Add at least 3 inches of margin on every side for framing and hooping. How much fabric you need has the full arithmetic, and the colour guide covers the other half of the decision.
Both numbers are adjustable in the pattern maker, and the finished size updates as you type.


